Fire Extinguisher
Easy Release Refillable Extinguisher Kit
0.75" – 3.25" tube
From $199.00
View detailsFire Extinguisher
Easy Release Kidde Extinguisher Kit
Kidde fire extinguisher, clamps, bolts, rubber padding and metal mounting bracket. Ready for immediate use.
- Mounts
- Fire Extinguisher
- Mounts to
- roll bar / roll cage tube, wall
- Tube range
- 0.75" – 3.25"
- Material
- Aluminum
- Installation
- Initial installation may require a hex-head wrench and possibly a Phillips screwdriver. After initial installation, no tools are needed to remove or replace the extinguisher in its mount.
Choose the outside diameter of the tube you're mounting to. TKO prepares the clamp and liner setup for that diameter before it ships.
Select your tube OD
Have an unusual or metric size? Enter the exact outside diameter to request custom preparation.
Not sure of your tube size? How to measure
- Best: close calipers across the outside of the bar where the clamp will sit (bare metal, not over padding or tape).
- No calipers? Wrap a string or paper strip once around the bar, mark it, measure the length, and divide by 3.14.
- Pick the option matching that number. Between sizes or a metric bar? Enter your exact size or call (307) 733-3063.
$159.00
Available to order
Will it fit?
Select your vehicle or measure your bar.
Description
Designed for Demanding Conditions
Our Easy Release system was developed in collaboration with professionals in the buggy racing industry, who needed a fire extinguisher mount that would hold securely in the roughest terrain but release instantly in an emergency. After extensive testing with real users, we created a simple, intuitive design—no pins, knobs, or buttons to fumble with.
One Motion Release
In the chaos of a vehicle fire, every second counts. With our system, anyone—whether familiar with it or not—can operate it instinctively:
- Grasp the extinguisher with one hand.
- Pull the red handle with the other.
- The extinguisher releases instantly into your hands.
This design makes it just as easy for a passerby to help if the driver is unable to act.
Mounting Recommendations
- Install in a “pull” position with the top of the extinguisher facing upward.
- If mounted on both sides of a vehicle, set them as mirror images for consistent operation.
- Works on both vertical and horizontal surfaces.
Redesigned Clamp System
Initial installation may require a hex-head wrench and possibly a Phillips screwdriver. After initial installation, no tools are needed to remove or replace the extinguisher in its mount. Hook each corner into the rectangular opening, pull over center, and you’re set. For extra security, a quick check with a screwdriver is optional but not required.
Kit Includes
- Clamps sized for your roll bar
- Mounting bolts
- Easy Release Bracket
- Kidde Extinguisher Bottle
Features
- Quick, tool-free open and close
- Works on vertical or horizontal applications
- Compatible with any TKO fastener, including flat mounts
- Flat mount option for walls and other flat surfaces
- This extinguisher is fully certified and approved for use in vehicles, off-road racing, and personal safety applications.
HOW TO INSTALL
Check out our How To Operate video. This video is for the Enforcer however they both use the Two Clamp Easy Release system and install the same way.
Save Some Money
You can save some money on shipping if you already have your own extinguisher bottle or you can pick one up at your local hardware store. See our Easy Release Extinguisher Bracket with bottle not included.
Check out our other popular products.
Roll Bar Accessory Mounts
Mighty Mount Electronics Holder
GoPro Mount
Adjustable Flag and Whip Mounts
Fuel Tank Kits
International Shipping
For international shipping orders please contact us with your address so we can get you an accurate shipping cost to your destination. (307) 733-3063 or email us.
Questions?
If you have any questions not covered here send us an email or call us at (307) 733-3063. Contact Us
Installation
- Tool-free
Videos
Related products
Reviews