HD (heavy duty) Clamps FRONT Tightening

HD Clamps

We can also accommodate those bars with less common sizes, for example the 1.85” on the Can-Am. Our smaller size clamps may be exactly what you need for that handle bar, luggage rack, bicycle, boat or motorcycle.

Available in black finish.

Each clamp comes with two rubber liners in 1/16” and 1/8” so each clamp can fit three different sizes. Please reference the sizing chart below when ordering.

Front Tighten or Back Tighten

Our HD clamps are available with both front and back tightening options. Front tightening screws work great when the clamp is up against a ceiling or windshield and you need to tighten the screws from the front. See our other listing for back tightening. Back tightening works great when the clamp is attached to some accessory like a box and you need to tighten the screws from the back.

Attach Almost Anything

TKO HD Clamps allow you to attach almost anything to your roll bar. So you can take those items rolling around on the floor and in your back end and hang them up out of the way on your roll bar for easy access. For instance you can put that GPS where you can see it. Mount your phone within easy reach. Attach a spare fuel can to your roll bar. Most importantly mount that Fire Extinguisher rolling around on the floor where it needs to be for easy access when needed. Great for your Razor, UTV, Jeep, boat or anything with a roll bar, hand rail or luggage rack. When using our rubber liners they will not mar your roll bar and do not require any drilling. Therefore you won’t void your warranty.

No Special Tools Required

No specialty tools are required to install or remove your accessory. An Allen wrench is all that is needed to install and attach your accessory to the clamp.

A Superior Clamp

Like all TKO Clamping Systems products they are machined out of solid 6061 T6 aluminum and use stainless steel screws to reduce corrosion. The HD (heavy duty) Clamp is more streamlined than most of our competitors. The bolts are recessed into the clamp unlike those clamps that have wings sticking out of either side. Each clamp fits multiple sizes. With fewer moving parts they are also less expensive than our other clamps and mounts. Using the same size lug it’s also interchangeable with all our other TKO accessories and parts.

Clamp Sizing Chart

Clamp #     Sizes

1          Fits 1 1/4” metal to metal. Using included liners 1 1/8” and 1” bars.

2          Fits 1 1/2” metal to metal. Using included liners 1 3/8” and 1 1/4” bars.

3          Fits 1 3/4” metal to metal. Using included liners 1 5/8” and 1 1/2” bars.

4          Fits 2” metal to metal. Using included liners 1 7/8” and 1 3/4” bars.

5          Fits 2 1/4” metal to metal. Using included liners 2 1/8” and 2” bars.

6          Fits 2 1/2” metal to metal. Using included liners 2 3/8” and 2 1/4” bars.

7          Fits 2 3/4” metal to metal. Using included liners 2 5/8” and 2 1/2” bars.

8          Fits 3” metal to metal. Using included liners 2 7/8” and 2 3/4” bars.

9          Fits 3 1/4” metal to metal. Using included liners 3 1/8” and 3” bars.

Pro Series Line of Products

Our Pro Series Line of Products are machined out of solid 6061 T6 aluminum and are built to the “Quality of the Pro but still priced for the Regular Joe”.

Made in America

We make all of our TKO Clamping Systems Accessory Mounts in house at our Pocatello, Idaho shop right here in the USA.

For hose clamps see our Premium Adjustable Clamps and our Custom Hose Clamps.