Polymer Headset or Helmet Hanger
TKO Clamping Systems new Polymer Headset or Helmet Hanger allows users to hang your headset or helmet up out of the way when not in use. Quality headsets today can run in the thousands of dollars. With our newly designed Helmet Hanger and retainer bar your expensive equipment will remain secure no matter how aggressive you are driving or how rough the terrain. Our retainer bar is 6” long by 3/4” wide, with a 3/4” opening on the end and is made out of Polymer Synthetic.
- Mounts
- —
- Mounts to
- roll bar / roll cage tube, flagpole, rack / hand rail
- Tube range
- See options
- Material
- Polymer
Choose the outside diameter of the tube you're mounting to. TKO prepares the clamp and liner setup for that diameter before it ships.
Select your tube OD
Have an unusual or metric size? Enter the exact outside diameter to request custom preparation.
Not sure of your tube size? How to measure
- Best: close calipers across the outside of the bar where the clamp will sit (bare metal, not over padding or tape).
- No calipers? Wrap a string or paper strip once around the bar, mark it, measure the length, and divide by 3.14.
- Pick the option matching that number. Between sizes or a metric bar? Enter your exact size or call (307) 733-3063.
$49.00
Unavailable
Will it fit?
Select your vehicle or measure your bar.
Description
Polymer Headset or Helmet Hanger
TKO Clamping Systems new Standard Polymer Headset or Helmet Hanger allows users to hang your headset or helmet up out of the way when not in use. Quality headsets today can run in the thousands of dollars. With our newly designed Helmet Hanger and retainer bar your expensive equipment will remain secure no matter how aggressive you are driving or how rough the terrain. Our retainer bar is 6” long by 3/4” wide, with a 3/4” opening on the end and is made out of Polymer Synthetic material.
New Product for 2026
Polymer Line of Products
Our Polymer Headset or Helmet Hanger is manufactured out of Synthetic Polymer which is very strong but also flexible and less expensive than our solid aluminum products.
Kit Includes
- 1 Polymer Headset or Helmet Hanger Bracket with Red end Clips
- 1 ZC (Zero Clearance Clamp) of your size
ZC (Zero Clearance) Fasteners
ZC (Zero Clearance) Fasteners from TKO are the same high quality as our other clamps and is also manufactured out of Solid Aluminum. The difference being the clamp does not wrap all the way around the bar. This allows the clamp to be mounted to a bar with limited or tight clearance like near a roof or windshield. Just like all our clamps they are built to fit roll bars, hand rails, luggage racks, handle bars, bike frames, flag poles and ladders. We can also accommodate those bars with less common sizes, for example the 1.875” on the Can-Am.
Each clamp comes with two rubber liners in 1/16” and 1/8” so each clamp can fit a wider range of sizes.
Please reference the sizing chart below when ordering and select a clamp size to fit your roll bar dimensions.
Clamp Sizing Chart
Clamp # Sizes
#1 Fits 1 1/4” metal to metal. Using included liners 1 1/8” and 1” bars.
#2 Fits 1 1/2” metal to metal. Using included liners 1 3/8” and 1 1/4” bars.
#3 Fits 1 3/4” metal to metal. Using included liners 1 5/8” and 1 1/2” bars.
#4 Fits 2” metal to metal. Using included liners 1 7/8” and 1 3/4” bars.
#5 Fits 2 1/4” metal to metal. Using included liners 2 1/8” and 2” bars.
Made in America
Like all of our clamps, TKO’ new Headset or Helmet Hangar is manufactured in our Pocatello, Idaho facility
Verified facts
- Like all of our clamps, TKO’ new Headset or Helmet Hangar is manufactured in our Pocatello, Idaho facility
Reviews