TKO Flag Bott-The Ultimate Off-Road Flag & Whip Solution

Protect those expensive flags and lighted whips with the TKO Flag Bott.

It will raise or lower your flags and lighted whips with the flip of a switch. The Flag Bott mounts to your roll bar and holds your flag or lighted whip at the angle you desire and will lower it out of the way at your command to drive under low objects like trees or when loading your buggy into your enclosed trailer or garage without the need to remove the flag or whip. Use two Flag Botts to hold a pair of flags or whips and control them with one switch.

Designed for Demanding Conditions

Designed by a retired government laboratory engineer with 40 years experience and a crack team of machinists that have over 50 years of experience.

Everything you need is included in the kit.

Kit Includes

• (1) Motorized TKO Flag Bott assembly
• Mounting hardware
• Fasteners
• Control switch
• Written installation instructions
• Installation, adjusting and tuning videos available online

 

A Wide Range of Industries and Applications

The TKO Flag Bott™ provides a fast, convenient way to raise and lower a flag with the flip of a switch—right from the driver’s seat. Originally designed to simplify flag operation, it has proven valuable across a wide variety of industries where safe, efficient, and reliable flag deployment is essential.

Common applications include:

• Ski boats in states where a skier-down flag is required
• Large boats needing clearance to go under bridges or other impediments 
• Warehouse forklifts and other industrial vehicles
• Oversized and over-dimensional freight transport
• Mining equipment
• Agricultural equipment operating on public roads
• Construction vehicles
• Logging trucks
• Airport ground support vehicles
• Industrial facilities using whip flags at blind intersections
• RV’s or Sprinter Vans with StarLink or Cell Phone Antennas
• And many other specialized commercial and industrial applications

Whether your operation requires improved safety, regulatory compliance, or simply greater convenience, the TKO Flag Bott helps operators deploy and retract flags quickly without leaving the vehicle.

Specifications

• The fasteners can install 360 degrees on a bar and the mounting hardware can rotate 360 degrees to fit any angle you desire.
• The mounting puck on the back of the box can be mounted towards the top of the box, the middle or the bottom of the box for customization.
• The flag/whip attach point has 4 set screws. By loosening them, the circle can be rotated 360 degrees. Once your desired angle or tilt is achieved, tightening the set screws will lock in the angle.

https://www.tkoclamps.com/wp-content/uploads/2026/06/Tko-Flag-Bott-Operation.mp4

https://www.tkoclamps.com/wp-content/uploads/2026/07/Flag-Bott-Introduction-mounting-step-1.mp4

https://www.tkoclamps.com/wp-content/uploads/2026/07/Flag-Bott-Adjusting-Height-Step-2.mp4

https://www.tkoclamps.com/wp-content/uploads/2026/07/Flag-Bott-Mounting-Step-3.mp4

https://www.tkoclamps.com/wp-content/uploads/2026/07/Flag-Bott-Wiring.mp4

https://www.tkoclamps.com/wp-content/uploads/2026/07/Tuning-and-Setup-Step-5A.mp4

https://www.tkoclamps.com/wp-content/uploads/2026/07/Tuning-and-setup-step-5B.mp4

https://www.tkoclamps.com/wp-content/uploads/2026/07/Flag-Bott-setting-the-proper-flag-or-whip-angle-and-tension-step6.mp4

Check out our other popular products.

Roll Bar Accessory Mounts

GoPro Mount

Adjustable Flag and Whip Mounts

 

International Shipping

For international shipping orders please contact us with your address so we can get you an accurate shipping cost to your destination. (307) 733-3063 or email us.

Questions?

If you have any questions not covered here send us an email or call us at (307) 733-3063. Contact Us