Whip / Flag
Motorcycle Whip Mount
From $24.00
View detailsMounts & Accessories
Whip & Flag Mounts
Be seen on the dunes and trails. Get your whip or flag perfectly vertical — on a roll bar, a dirt bike axle nut, or raised and lowered with the flip of a switch.
- Products
- 4
- From
- $24.00
- Bar sizes
- 1″ – 3.25″
- Made in
- Pocatello, ID
Shop
Shop whip & flag mounts
Whip & Flag Mounts for your vehicle
Fully adjustable
Tilt, rotate and position your whip so it stands perfectly vertical.
Dirt bike ready
Fits 27mm or 32mm rear axle nuts without removing the nut.
Raise & lower on command
The Flag Bott lowers flags and lighted whips with the flip of a switch.
About these mounts
About TKO whip & flag mounts
The Pro Series Heavy Duty Whip/Antenna Mount is fully adjustable — up, down, left, right and rotating — so your whip sits exactly where you want it. It comes with TKO's HD (heavy duty) clamps for bars from 1 1/4″ to 2 1/4″, machined from solid 6061-T6 aluminum, and installs with a standard Allen wrench.
For dirt bikes, the Motorcycle Whip Mount wraps a 27mm or 32mm rear axle nut like a socket and clamps down with an Allen wrench — no need to loosen or remove the nut. And the motorized TKO Flag Bott raises and lowers flags or lighted whips from the driver's seat, so you can drive under trees or into a trailer without removing them.
How to choose
Which whip or flag setup?
- 01
Heavy Duty Whip/Antenna Mount
Clamps to roll bars 1 1/4″ – 2 1/4″ with HD clamps and full articulation.
- 02
Motorcycle Whip Mount
Wraps a 27mm or 32mm rear axle nut — check your manual for your size.
- 03
TKO Flag Bott
Motorized raise/lower for flags or lighted whips; two Flag Botts can run on one switch.
- 04
American Style Whip Flag
Canvas flag whose sleeve fits a 1/4″ fiberglass whip pole (clip included).
How a TKO mount works
One patented clamp. Endless mounts.
- 01
Pick your mount
Choose the mount for what you're carrying — phone, GPS, camera, extinguisher, whip, Starlink and more.
- 02
Match your bar
Choose the clamp size for your tube's outside diameter. Two rubber liners let one clamp fit three sizes.
- 03
Bolt it on
No drilling — a standard Allen wrench or Phillips screwdriver is all you need.
FAQ
Whip & Flag Mounts FAQ
Do I need a flag on my dirt bike or UTV?
A flag makes you visible to other riders of ATVs, UTVs, SXS and 4x4s — especially in sand dunes and hilly areas — and having one is required in some areas.
Will the motorcycle whip mount fit my bike?
It's made for 27mm and 32mm rear axle nuts. 32mm is common on many Honda, Suzuki, Kawasaki and Yamaha models — check your manual for your bike's size.
What does the Flag Bott do?
It raises and lowers your flag or lighted whip with the flip of a switch, so you can drive under low objects or load into an enclosed trailer without removing it. Two Flag Botts can hold a pair of flags or whips on one switch.
What pole does the whip flag fit?
The sleeve fits a 1/4″ fiberglass whip pole (clip included) and can accommodate a 3/8″ pole with adhesive.
From the TKO blog
Learn more
Do You Need a Whip Mount for Dirt Bike Riding at the Sand Dunes?
Yes, you need a whip mount and flag on your dirt bike. In most cases, the law requires it. If you plan to ride your dirt
Read
How the TKO Flag Bott Protects Your Expensive Off-Road Flags and Whips
You just watched your $150 lighted whip snap in half against a tree branch. It happens fast, and it happens often. A whip flag or antenna
Read
Top Whip Antenna Mount for Optimal Performance in Your Vehicle
Ready to upgrade your off-roading rig with a solid antenna whip mount? You’re in the right place. If you’re like most guys who take their trucks,
Read- U.S. Patent No. D885,877
- Designed & machined in Pocatello, Idaho
- SEMA 2019 Product of the Year (Wheels in Motion TV)
- 4-time Global Media Award winner (2017–2019)
Keep building your rig
Other mounts
Reviews